Pentra-Sil® (244+) | Lithium Densifier and Concrete Sealer

Features

Engineered for parking and maintenance facilities
Protects against salt and freeze/thaw damage
Hardens, densifies and dust-proofs
Uses patented Nano-Lithium® technology
Easy to use, low odor, no rinsing required
Defends against water and harmful substances
Not susceptible to UV damage
Breathable: allows moisture to escape without damage to the surface
Penetrates: no film to lift or peel off
Reduces efflorescence and surface sweating
Does not contribute to surface ASR or promote crazing
VOC compliant, may contribute to LEED points (IEQ credit)

Properties

Meets NCHRP 244 Standard for Chloride Intrusion

Application method

Sprayer

Color

Red tint, dries clear

Coverage Rate

Machine-troweled: 600-800 ft² per gallon (14.7-19.6 m² per liter) Broom-finished: 250-350 ft² per gallon (6.1-8.6 m² per liter)

Film-forming

Form

Liquid

Freeze point

32 ºF (0 ºC)

Odor

Slight to none

11-12

Shelf life

1 year in unopened, sealed container

Specific gravity

1.1

Total solids

17.1%

VOC content

<50g/L

Downloads

Type

Document Name

File Size

Safety Data Sheet

Document Name Pentra-Sil® (244+) SDS

File Size 202.0 KB

View

Technical Data Sheet

Document Name Pentra-Sil® (244+) TDS

File Size 2.2 MB

View

Brand:

Adhesives Technology

Technology:

Lithium, Colloidal & Strontium

Application:

Building Envelope and Components

Market:

Building Construction Infrastructure

Available Packaging

Size

Part Number

Quantity

Picture

Size 1 Gallon Jug

Part Number CCT-060-1

Quantity 126

Picture

Size 5 Gallon Pail

Part Number CCT-060-5

Quantity 35

Picture

Size 55 Gallon Drum

Part Number CCT-060-55

Quantity 4

Picture

Size 275 Gallon Tote

Part Number CCT-060-275

Quantity 1

Picture

Related Products

Viewing options:

CONVERGENT SlabArmor™ Seal&Shine Finish

High-Performance, High-Gloss Concrete Finisher and Sealer

Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...

SDS TDS

CONVERGENT SlabArmor™ Closer

Colloidal Silica Concrete Densifier/Hardener

SlabArmor™ Closer is the second step in the SlabArmor system. This colloidal silica densifier/hardener is applied after power troweling has been completed. A single application is applied to the surface and requires no scrubbing or rinsing. Its reactive...

SDS TDS

CONVERGENT Pentra-Sil® (IH)

Improves gloss and clarity in polishing terrazzo, stone and concrete

Pentra-Sil® (IH) is specifically designed for application during the concrete polishing process. This penetrating hardener improves the final appearance by allowing abrasive tooling to work more effectively, increasing final gloss and clarity. It reduces downtime between polishing steps,...

SDS TDS

CONVERGENT Pentra-Sil® (HDS)

Restores worn, damaged cementitious surfaces

Pentra-Sil® (HDS) is engineered for polished, colored, dyed or acid-stained cementitious surfaces and is ideal for polishing and restoring worn and damaged flooring. This eco-friendly lithium solution hardens, densifies, and seals concrete, overlays, and terrazzo. It enhances color,...

SDS TDS

CONVERGENT Pentra-Shield®

Hardener, Densifier & Sealer

Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...

SDS TDS

CONVERGENT SlabArmor™ Starter

Colloidal Silica Concrete Curing/Finishing Aid and Hardener

SlabArmor™ Starter is a colloidal silica concrete curing/finishing aid and hardener used in the placement and finishing of new concrete. Its hydrophilic property holds bleed water in the capillaries of the concrete slab during the curing process, reducing...

SDS TDS