The model CP-ADS6418 is a 64-channel, 18-bit, analog-to-digital converter card. The new card is designed for high-performance data acquisition and hardware-in-the-loop simulation applications. The card is also fully supported by Concurrent’s SIMulation Workbench real-time modeling environment.
The CP-ADS6418’s successive-approximation-register (SAR) design converts up to 500K S/sec per channel when using 64 channels. The card can also be used as a 32-channel card supporting up to 700K samples/second per channel. In addition, two channels can be combined to sample as a single channel providing up to 32 channels converting up to 1 MS/sec per channel or 16 channels converting up to 1.4 MS/sec per channel. Groups of 16 channels can be individually programmed by four independent clocks to collect samples at different frequencies.
The card is implemented using Analog Devices LTC2353 converters. Each converter group has an independently selectable clock source generated by a low-jitter clock generator. Overvoltage protection is included to prevent card damage. The card can be configured for single-ended input or differential input for low noise and accurate measurements. Multi-board clocking and synchronization is supported. A Concurrent RedHawk Linux driver with an extensive software API that includes DMA and interrupt support is available.
“The CP-ADS6418 is a very cost-effective solution for applications that require large A/D channel counts and high-performance.” Says Ken Jackson, President and CEO of Concurrent Real-Time. “The card fully complies with the NIST traceable calibration standard.”
Concurrent’s SIMulation Workbench is a powerful real-time, modeling environment that provides a complete framework for developing and executing real-time hardware-in-the-loop and man-in-the-loop simulations for automotive, aerospace, and defense applications. Its powerful GUI allows users to conveniently configure, start, stop, record and playback simulation runs. SIMulation Workbench provides fast, direct shared-memory-access to all of a simulation’s parameters and signals. It enables complex multi-rate simulations to be run on a single multi-processor system utilizing any number of cores, delivering better performance when compared to legacy solutions.
Concurrent Real-Time, 2881 Gateway Drive, Pompano Beach, FL 33069, 800-666-4544, www.concurrent-rt.com
Leave a Reply
You must be logged in to post a comment.