Photo: classiccurbs.com
Always affordable and at once both decorative and functional, concrete garden edging effectively defines garden beds, tree surrounds, and driveway curbs, their versatility enabling you to match any landscape contour.
Perhaps most appealing of all is that concrete garden edging lasts for years and years. Once you’ve completed this project, you can forget all about it, resting assured of its durability.
Even though the quantity of requisite materials will vary in keeping with the ambitiousness of your vision, you can use the steps below to make concrete garden edging in whatever length you wish.
MATERIALS AND TOOLS
- Saw
- Hammer
- Plywood or hardboard
- Wood stakes
- 1″ wood screws
- Drill (with screw bit)
- Wood float
- Mixing hoe
- Shovel
- Margin trowel
- Edging tool
- Mixing tub
- Concrete mix
- Liquid cement color
- Acrylic concrete sealer
- Bucket
STEP 1
Start by laying out the perimeter of your edging with a garden hose or a length of rope. For best results, devise a design in which the border is at least 5″ wide.
Photo: quikrete.com
Photo: quikrete.com
STEP 2
Excavate your planned border perimeter to a 4″ depth and an 8″ width. Compact the soil to create a solid base for the concrete you will add in a later step.
Photo: quikrete.com
Photo: quikrete.com
STEP 3
Drive 1″ x 1″ x 12″ wood stakes at one-and-a-half-foot intervals along the border.
STEP 4
With 1″ wood screws, attach 1/4″ x 4″ x 8″ pieces of flexible hardboard (for curved borders) or rigid plywood (for angular installations) to the wood stakes.
Photo: quikrete.com
Photo: quikrete.com
STEP 5
For spacers, cut 1″ x 1″ boards in lengths equal to the width of the border. Meanwhile, set 1″ x 1″ x 12″ wood stakes along the outside of the border in three-foot intervals, then set your spacers as needed along the bottom of the excavated area to maintain a consistent garden border width.
STEP 6
Having mixed the concrete to a firm, workable consistency, pour it into the border form, using a margin trowel to spread and consolidate the mix.
Photo: quikrete.com
Photo: quikrete.com
STEP 7
Wait for the bleed water to disappear, after which time you can smooth the surface with a wood float. Then, using the margin trowel, cut control joints at three-foot intervals, each one at least 1″ deep into the concrete. Consolidate and smooth the border edges using a concrete edging tool.
STEP 8
Finally, apply acrylic concrete sealer to the concrete before letting it cure for three to five days. Once the concrete has cured, remove the forms and backfill against the lawn border with dirt or sod.
For more garden edging and walkway solutions, visit QUIKRETE.